Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_P86CH0O0I0RF10IB06HRVQ0087
S2K Commerce - Products Dropdown
Z7_11LI04820H5B40QDV9TVRM1002
S2K Commerce - Shopping Cart
Z7_EL9QHKG10GPM20IJGE61AK10S5
S2K Commerce - Order Entry
Squba Sealed Wire-to-wire Connectors System | Molex
Made in the USA Cable Ties from ACT
48VDC Dual USB Chargers from Blue Sea Systems
Receptacle & Plug ATP Connector Kit
Amphenol Sine Systems ATP Series Connectors are designed as an IP68/69K rated (mated), high-performance, cost-effective, thermoplastic solution with superior environmental seals and seal retention capabilities. They are designed for use with 10-14 Ga. with size 12 contacts handling up to 25A. The entire ATP Series of connectors has been developed to be completely compatible with all other existing standard products industry-wide.
  • Amphenol Sine Systems ATP6PS-CKIT 6-Pin Receptacle & Plug ATP Connector Kit
  • Category: Amphenol ATP Connectors
  • Manufacturer: Amphenol Sine Systems
  • Component Type: Receptacle & Plug Housing 
  • Number of Pins: 6
  • Deutsch DTP compatible connector line
  • High-performance, cost-effective Deutsch DTP replacement
  • Durable thermoplastic housings offer excellent UV resistance, dielectric/mechanical properties and RoHs compliance
  • Sealing system is comprised of a front and rear silicone multi-sealing perimeter against environmental ingress
  • Nickel-plated contacts ensure an electrically reliable connection
  • Integral latching system ensures definitive electrical and mechanical connection
  • Pin terminals and socket terminals can be interchangeable with Deutsch DT terminals
  • Amphenol receptacles must be used with the Amphenol wedgelocks in order to mate properly with Deutsch DT connectors
  • Amphenol Kit Includes: 
    • Qty. 2 | AT60-204-12141, Pin Terminal, Size 12, 14-12 Ga.
    • Qty. 1 | AWP-6P, ATP 6-Pin Plug Wedge
    • Qty. 1 | ATP04-6P, ATP 6-Pin Receptacle Connector 
    • Qty. 2 | AT62-203-12141, Socket Terminal, Size 12, 14-12 Ga.
    • Qty. 1 | AWP-6S, ATP 6-Pin Receptacle Wedge 
    • Qty. 1 | ATP06-6S, ATP 6-Pin Plug Connector  
  • Wire Gauge Range: 14-10 Ga.
  • Current Rating: 25A
  • Operating Temperature: -67°F (-55°C) to 257°F (125°C)
54.8200
EACH
This function is not yet complete
Relay, ACR & Low Voltage Disconnect
XD Series Flex Relays are available in single, double, and triple variations. Each position in the flexible relay can be used as a normal 500A relay battery disconnect, an automatic charging relay, or even a low voltage disconnect. Available with or without manual override knobs.
  • Egis Mobile Electric 8710-1100B XD Series Flex Relay
  • Category: Battery Chargers
  • Manufacturer: Egis
  • Bi-Stable Automatic Charging Relay at up to 500A Continuous Current
  • Available with intuitive front facing manual override knob with ability to lock device On or Off for servicing 
  • Fully adjustable Open and Close voltage set points support all battery types
  • Supports single & multiple engine installations with Dual Start/Engine isolation inputs
  • Remote On/Off input allows combining batteries during hard starts events 
Features:
  • Eliminate dead start batteries by sharing the charging on either of two batteries and isolating batteries when no charge sources are present
  • Adjustable On and Off Voltage Settings: Allows sharing start battery energy for auxiliary battery while ensuring engine starting ability 
  • Dual Engine Isolation: Selectable input options for protecting sensitive electronics or isolating multiple charging sources to optimize overall system performance
  • LED Status Display: Easy-to-see facing LED indicator provides visual device status
Primary Specifications:
  • Ingress Protection: Sealed to IP67/ IP6K9, high temperature rated materials allow mounting anywhere
  • Open Voltage Range: 10 secs from 11.7-12.4VDC to 120 secs from 12.9-13.6VDC
  • Standby Current: 1.3mA
  • Max. Cranking Current: up to 1,500
Termination:
  • Mounting Holes: 1/4" / M6 hardware
  • Terminal Stud Size: M10 x 1.5 stainless steel material 
Includes:
  • 40-circuit label sheet making circuit and relay identification more convenient
  • Protective cover, protects terminal studs and cables from inadvertent shorts
  • Standard 4 year warranty 
135.8400
EACH
This function is not yet complete
Plug-to-USB 2.0 Type A Receptacle
Achieve superior signal integrity in harsh factory and commercial vehicle applications with IP67 Sealed Industrial USB 2.0 Solutions, designed for fast installation and robust pull-out resistance.
  • Molex 847290005 Sealed Industrial USB 2.0 Type A Plug-to-USB 2.0
  • Category: USB Charging Ports
  • Manufacturer: Molex
  • Series: Sealed Industrial USB
  • Molex's Sealed Industrial USB 2.0 Panel-Mount Receptacles improve system performance and reliability with a sealed, rugged design
  • Fully shielded cable provides electromagnetic interference/radio frequency interference (EMI/RFI) protection
  • Maintains high-speed, reliable connections with enhanced power optimization; retains backward compatibility to USB 2.0 devices
  • Cordsets are water and dust tight for functional integrity
  • Wire Size: 28 Ga.
  • Ingress Protection: IP67
  • Operating Temperature: -40°F (-40°C) to 176°F (80°C)
  • Housing Material: UL 94V-0

Sealed Industrial USB Solutions

21.6800
EACH
This function is not yet complete
Qty Item #
Don't Miss Out!
Sign up for Waytek's emails and stay up to date
Customer Service Hours
Monday-Friday 7:30AM-5:30PM CST
1.800.328.2724
Waytek, Inc.
2440 Galpin Court
Chanhassen, MN 55317 USA
Social Media