Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_P86CH0O0I0RF10IB06HRVQ0087
Z7_11LI04820H5B40QDV9TVRM1002
Z7_EL9QHKG10GPM20IJGE61AK10S5
Receptacle & Plug ATP Connector Kit
Amphenol Sine Systems ATP Series Connectors are designed as an IP68/69K rated (mated), high-performance, cost-effective, thermoplastic solution with superior environmental seals and seal retention capabilities. They are designed for use with 10-14 Ga. with size 12 contacts handling up to 25A. The entire ATP Series of connectors has been developed to be completely compatible with all other existing standard products industry-wide.
- Amphenol Sine Systems ATP6PS-CKIT 6-Pin Receptacle & Plug ATP Connector Kit
- Category: Amphenol ATP Connectors
- Manufacturer: Amphenol Sine Systems
- Component Type: Receptacle & Plug Housing
- Number of Pins: 6
- Deutsch DTP compatible connector line
- High-performance, cost-effective Deutsch DTP replacement
- Durable thermoplastic housings offer excellent UV resistance, dielectric/mechanical properties and RoHs compliance
- Sealing system is comprised of a front and rear silicone multi-sealing perimeter against environmental ingress
- Nickel-plated contacts ensure an electrically reliable connection
- Integral latching system ensures definitive electrical and mechanical connection
- Pin terminals and socket terminals can be interchangeable with Deutsch DT terminals
- Amphenol receptacles must be used with the Amphenol wedgelocks in order to mate properly with Deutsch DT connectors
- Amphenol Kit Includes:
- Qty. 2 | AT60-204-12141, Pin Terminal, Size 12, 14-12 Ga.
- Qty. 1 | AWP-6P, ATP 6-Pin Plug Wedge
- Qty. 1 | ATP04-6P, ATP 6-Pin Receptacle Connector
- Qty. 2 | AT62-203-12141, Socket Terminal, Size 12, 14-12 Ga.
- Qty. 1 | AWP-6S, ATP 6-Pin Receptacle Wedge
- Qty. 1 | ATP06-6S, ATP 6-Pin Plug Connector
- Wire Gauge Range: 14-10 Ga.
- Current Rating: 25A
- Operating Temperature: -67°F (-55°C) to 257°F (125°C)
54.8200
EACH
This function is not yet complete
Relay, ACR & Low Voltage Disconnect
XD Series Flex Relays are available in single, double, and triple variations. Each position in the flexible relay can be used as a normal 500A relay battery disconnect, an automatic charging relay, or even a low voltage disconnect. Available with or without manual override knobs.
- Egis Mobile Electric 8710-1100B XD Series Flex Relay
- Category: Battery Chargers
- Manufacturer: Egis
- Bi-Stable Automatic Charging Relay at up to 500A Continuous Current
- Available with intuitive front facing manual override knob with ability to lock device On or Off for servicing
- Fully adjustable Open and Close voltage set points support all battery types
- Supports single & multiple engine installations with Dual Start/Engine isolation inputs
- Remote On/Off input allows combining batteries during hard starts events
- Eliminate dead start batteries by sharing the charging on either of two batteries and isolating batteries when no charge sources are present
- Adjustable On and Off Voltage Settings: Allows sharing start battery energy for auxiliary battery while ensuring engine starting ability
- Dual Engine Isolation: Selectable input options for protecting sensitive electronics or isolating multiple charging sources to optimize overall system performance
- LED Status Display: Easy-to-see facing LED indicator provides visual device status
- Ingress Protection: Sealed to IP67/ IP6K9, high temperature rated materials allow mounting anywhere
- Open Voltage Range: 10 secs from 11.7-12.4VDC to 120 secs from 12.9-13.6VDC
- Standby Current: 1.3mA
- Max. Cranking Current: up to 1,500
- Mounting Holes: 1/4" / M6 hardware
- Terminal Stud Size: M10 x 1.5 stainless steel material
- 40-circuit label sheet making circuit and relay identification more convenient
- Protective cover, protects terminal studs and cables from inadvertent shorts
- Standard 4 year warranty
135.8400
EACH
This function is not yet complete
Plug-to-USB 2.0 Type A Receptacle
Achieve superior signal integrity in harsh factory and commercial vehicle applications with IP67 Sealed Industrial USB 2.0 Solutions, designed for fast installation and robust pull-out resistance.
- Molex 847290005 Sealed Industrial USB 2.0 Type A Plug-to-USB 2.0
- Category: USB Charging Ports
- Manufacturer: Molex
- Series: Sealed Industrial USB
- Molex's Sealed Industrial USB 2.0 Panel-Mount Receptacles improve system performance and reliability with a sealed, rugged design
- Fully shielded cable provides electromagnetic interference/radio frequency interference (EMI/RFI) protection
- Maintains high-speed, reliable connections with enhanced power optimization; retains backward compatibility to USB 2.0 devices
- Cordsets are water and dust tight for functional integrity
- Wire Size: 28 Ga.
- Ingress Protection: IP67
- Operating Temperature: -40°F (-40°C) to 176°F (80°C)
- Housing Material: UL 94V-0
Sealed Industrial USB Solutions
21.6800
EACH
This function is not yet complete
| Qty | Item # |
