S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry
NC Amp
Positions
Amps
Component Type
NO Amp
Input Studs
Ingress Protection

12-24V Automotive Power Distribution Modules and Blocks

1 - 6 of 6
View:
 
Description
Price
Quantity
  • Littelfuse FLEC3000Z-0 Configurable Power Distribution Module
  • Category: Power Distribution Modules
  • Manufacturer: Littelfuse
  • Volt Rating: 12 or 24V DC
  • Max Load: 300A
  • Max Fuse Rating: 30A
  • Fuse Capacity: 28 MINI style
  • Relay Capacity: 18 ISO style
  • Operating Temp: -40 to +85C
  • Vibration Resistance: ISO 16750-3 Test II, 32 Hours
  • Shock Resistance: ISO 16750-3, Section 4.2.2
  • Output Connectors: Delphi GT Series
  • FLEC maximizes available space and limits the number of additional units required
  • The versatile nature of the FLEC unit means it can accept a large number of component types. MINI, ATO, MAXI, JCASE, MCASE, and ISO components are all accepted
  • Rugged and sealed, the unit boasts an IP67 rating which allows it to be mounted in locations susceptible to moisture and dirt without any adverse effects
  • Input stud caps prevent accidental short circuit while performing maintenance to and around the box
  • Reduced risk of wiring faults: the FLEC uses highly reliable printed circuit board
  • Note: FLEC can be custom designed. Contact Waytek sales for details
  • FLEC parts included:
    • 6 - 15A MINI Fuse
    • 22 - 30A MINI Fuse
    • 18 - ISO 280 Micro Relay with Resistor
      • NO Amp: 35A
      • NC Amp: 20A
      • Volt Rating: 12V
    • 2 - Spare 15A MINI Fuse
    • 2 - Spare 30A MINI Fuse
    • 1 - Fuse Puller
  • Power Distribution Connectors Correspond with below parts:
    • J4 Connection - GT280 14-way 38391
    • J5 Connection - GT150 16-way 38337
    • J6 Connection - GT150 10-way 38333
    • J7 Connection - GT150 12-way 38335
    • J8 Connection - GT280  8-way  38382
    • J9 Connection - GT280 16-way 38388
Item#:
45630
Manufacturer Item:
FLEC3000Z-0
Manufacturer:
Littelfuse
Min. Order Qty:
1
Avail #:
21
1+
377.4860
5+
359.5100
10+
342.3950
EACH
  • Littelfuse FLEC3000Z-0U Configurable Power Distribution Module
  • Category: Power Distribution Modules
  • Manufacturer: Littelfuse
  • FLEC maximizes available space and limits the number of additional units required
  • The versatile nature of the FLEC unit means it can accept a large number of component types. MINI, ATO, MAXI, JCASE, MCASE, and ISO components are all accepted
  • Rugged and sealed, the unit boasts an IP67 rating which allows it to be mounted in locations susceptible to moisture and dirt without any adverse effects
  • Input stud caps prevent accidental short circuit while performing maintenance to and around the box
  • Reduced risk of wiring faults: the FLEC uses highly reliable printed circuit boar
  • Note: FLEC can be custom designed. Contact Waytek sales for details
  • Power Distribution Connectors Correspond with below parts:
    • J4 Connection - GT280 14-way 38391
    • J5 Connection - GT150 16-way 38337
    • J6 Connection - GT150 10-way 38333
    • J7 Connection - GT150 12-way 38335
    • J8 Connection - GT280 8-way 38382
    • J9 Connection - GT280 16-way 38388
  • Volt Rating: 12 or 24V DC
  • Max Load: 300A
  • Max Fuse Rating: 30A
  • Fuse Capacity: 28 MINI style
  • Relay Capacity: 18 ISO style
  • Operating Temp: -40 to +85C
  • Vibration Resistance: ISO 16750-3 Test II, 32 Hours
  • Shock Resistance: ISO 16750-3, Section 4.2.2
  • Ingress Protection: IP67
  • Output Connectors: Delphi GT Series
  • Input Studs: M8
Item#:
45631
Manufacturer Item:
FLEC3000Z-OU
Manufacturer:
Littelfuse
Min. Order Qty:
1
Avail #:
12
1+
369.0960
5+
351.5190
10+
334.7820
EACH
The mVEC is a power distribution slave module that distributes power to other devices in a vehicle, and communicates over a CAN bus. Because it is a slave module, the mVEC relies on other CAN modules to control its relays and monitor component status messages.
The mVEC is ideal for various applications including heavy truck, construction, agriculture, transit bus and coach, marine, recreational vehicle, and specialty vehicle applications. The mVEC is a cost effective solution for power distribution systems that require the ability to monitor and control relays and fuses; and a great replacement for complex, fully electronic (solid state) power distribution modules. 
  • EATON 31M-000-2 Mulitplex Vehicle Electrical Center
  • Category: Power Distribution Modules
  • Manufacturer: EATON
  • Acts as a slave module on a J1939/CAN open network, communicating via the vehicle data bus with the master controller
  • Functions as a node in an existing vehicle J1939/CAN multiplexing network
  • Controls relays via direction of J1939 CAN bus
  • Reports status of relays and fuses each second to the J1939 CAN bus, indicating any blown fuse or failed relay
  • Supports both 12V and/or 24V electrical requirements
  • Pre-populated with components that have 2.8mm blades (280-series components) module features:
    • 8 - ISO Micro Relay with Resistor
    • NO Amp: 35A
    • NC Amp: 20A
    • Voltage Range: 12-24 VDC
    • 16 - 10A ATM MINI Fuse
    • 1 - Fuse Puller
  • Output: 8 way power distribution connectors used with tanged terminals
  • Input: studded input supports two M8 input power studs for DC power
  • CAN connector 38293
  • Max Current: 200A
  • 100 Per Input Stud (M8)
  • 30 Per Output Terminals
  • 100A Per Output Connector
  • Operating Temperature: 40F (-40C) to 185F (85C)
  • Ingress Protection: up to IP66 requirements
  • Output Terminals: Delphi Metri-Pack 280 Series (sealed tang or tangless) 
Item#:
46066
Manufacturer Item:
31M-000-2
Manufacturer:
Eaton
Min. Order Qty:
1
Avail #:
37
1+
294.6720
5+
280.6340
10+
267.2780
EACH
  • EATON's Bussmann Series 15401-2-0-1-0A RFRM Fuse Block
  • Category: Power Distribution Modules
  • Manufacturer: EATON
  • Color: Black
  • Fuse Holder Type: Fuse Block
  • Current Rating: 200A (100A per bus bar)
  • Voltage: 12/24
  • Mounting: #10-32 or M5 x 0.8 available, 24 in-lbs max
  • Holds 10 micro relays & up to 40 fuses/circuit breakers
  • Weather-tight power distribution module (PDM)
  • Accepts wire sizes #12-22 AWG
  • Dual Bus Bars
  • Includes standard cover
  • IP66
  • Nuts not included
  • Orientation mounting application intended for horizontal to vertical

Item#:
46354
Manufacturer Item:
15401-2-0-1-0A
Manufacturer:
Eaton
Min. Order Qty:
1
Avail #:
202
1+
85.5230
5+
80.0940
10+
75.0120
25+
67.5060
50+
64.9110
EACH
  • EATON's Bussmann Series 15310-1-2 RTMR Fuse Panel
  • Category: Power Distribution Modules
  • Manufacturer: EATON
  • Color: Black
  • Fuse Type: Mini Fuses
  • Fuse Holder Type: Fuse Block
  • Current Rating: 30A per max terminal
  • 60 positions
  • 12/24 Vdc
  • No Bus Bars
  • Cover included
  • IP66
Item#:
46348
Manufacturer Item:
15310-1-2
Manufacturer:
Eaton
Min. Order Qty:
1
Avail #:
233
 
RoHS Compliant
REACH Compliant
1+
20.9580
5+
18.7110
10+
17.4830
50+
16.1810
100+
15.4090
200+
14.6780
EACH
  • EATON's Bussmann Series 15404-2-0-1-0A RFRM Fuse Panel
  • Category: Power Distribution Modules
  • Manufacturer: EATON
  • Color: Black
  • Fuse Holder Type: Fuse Block
  • Max Current Rating: 200A
  • Voltage: Nominal 12VDC and 24VDC systems
  • Holds 10 micro relays & up to 40 fuses/circuit breakers
  • Cover included
  • IP66
  • Fits up to 10 of ISO 280 micro relays and a combination of 40 mini fuses
Item#:
46357
Manufacturer Item:
15404-2-0-1-0
Manufacturer:
Eaton
Min. Order Qty:
1
Avail #:
30
1+
60.4170
5+
56.5850
10+
52.9940
25+
47.6890
50+
45.8560
EACH
1 - 6 of 6
View: