S2K Commerce - Products Dropdown
S2K Commerce - Shopping Cart
S2K Commerce - Order Entry

New Products - Battery Management

1 - 9 of 9
View:
 
Description
Price
Quantity
  • Cole Hersee 880154 Terra SR Series Battery Disconnect Switch with Lock Out
  • Category: Battery Disconnects
  • Manufacturer: Cole Hersee
  • SR Series
  • Switch Type: Mechanical
  • Circuitry: SPST
  • Amp Rating: 600A
  • Max Volts: 32V
  • Contact Action: On-Off
  • High Cranking, Panel mount with lock out
  • Temp. Range: -58°F (-50°C) to 221°F (105°C)
  • Terminal stud size 3/8"-16 x 7/8" long
  • Isolate high current DC circuits from battery sources
  • Stainless steel hardware and tin-plated copper studs
  • Pad lock out for protection from tampering or when the electrical system is being serviced
  • Ignition protection to SAE J1171 and ISO 8846 for installation in a battery box for vehicles carrying hazardous loads
Item#:
44042
Manufacturer Item:
880154
Manufacturer:
Littelfuse
Min. Order Qty:
1
Avail #:
0
 
New Item
1+
7.8020
5+
7.3610
10+
7.1300
50+
6.6540
100+
6.3450
EACH
  • Carling Technologies BDB14-RA Battery Disconnect Switch
  • Category: Battery Disconnects
  • Manufacturer: Carling Technologies
  • Designed to minimize battery drain, ensure maintenance personnel safety, and when used in conjunction with a padlock, provide vehicle theft protection
  • The BD-Series is IP67 sealed and lock compatible. This allows operators to lock out the power enabling them to safely conduct maintenance on the application. The BD-Series can also be used as a security measure to help prevent theft
  • Current Rating: 24 VDC
  • 300A @ 24VDC: 3,000 Operation
  • Operating Temp: -40°C to 85°C
  • Terminal Option: M14 Stud
  • Mounting: M8
  • Circuits: On-Off
  • Ingress Protection Rating: IP67
  • Lock compatible
Battery Disconnect Switch
 
Item#:
44051
Manufacturer Item:
BDB14-RA
Manufacturer:
Carling Technologies
Min. Order Qty:
1
Avail #:
28
 
RoHS Compliant
REACH Compliant
1+
37.5060
5+
33.4850
10+
31.2800
50+
28.9530
100+
27.5730
200+
26.2650
EACH
The LVD is installed between the battery and all loads. If the voltage drops below the setpoint voltage for a pre-determined period of time, the LVD will open, disconnecting all loads including the LVD itself, thus protecting the batteries from any further discharge. Once the LVD has opened, the close pin can be activated, forcing the LVD to close which allows the vehicle/system to be restarted.
  • Gigavac MXSL15BE Sealed Automatic Low Voltage Disconnect
  • Category: Low Voltage Disconnects
  • Manufacturer: Gigavac
  • The hermetically sealed chamber ensures that coil, contacts, and electronics are shielded from all outside environmental factors
  • Gigavac's MX Series sealed DC Contactors are designed to meet MIL-R-6106 and are especially suited for heavy-duty applications
  • Gas filled hermetic chamber protects key components
  • Exceeds IP69K standard
  • Tested to temperatures up to 200°C
  • Mating Connector DT06-08SA, 38178 or 38428
Item#:
77150
Manufacturer Item:
MXSL15BE
Manufacturer:
Gigavac
Min. Order Qty:
1
Avail #:
25
1+
272.3810
5+
259.4130
10+
247.0550
EACH
The LVD is installed between the battery and all loads. If the voltage drops below the setpoint voltage for a pre-determined period of time, the LVD will open, disconnecting all loads including the LVD itself, thus protecting the batteries from any further discharge. Once the LVD has opened, the close pin can be activated, forcing the LVD to close which allows the vehicle/system to be restarted.
  • Gigavac MXSL15CE Sealed Automatic Low Voltage Disconnect
  • Category: Low Voltage Disconnects
  • Manufacturer: Gigavac
  • The hermetically sealed chamber ensures that coil, contacts, and electronics are shielded from all outside environmental factors
  • Gigavac's MX Series sealed DC Contactors are designed to meet MIL-R-6106 and are especially suited for heavy-duty applications
  • Gas filled hermetic chamber protects key components
  • Exceeds IP69K standard
  • Tested to temperatures up to 200°C
  • Mating Connector DT06-08SA, 38178 or 38428
Item#:
77151
Manufacturer Item:
MXSL15CE
Manufacturer:
Gigavac
Min. Order Qty:
1
Avail #:
24
1+
272.3810
5+
259.4130
10+
247.0550
EACH
Alternator Field Disconnect (AFD) is a feature of some battery switches. AFD protects the diodes in the alternator if the battery switch is switched to the OFF position while the engine is running.

Packaged for retail use only. For bulk product, see item 78411B (must be logged in to purchase bulk)
  • Blue Sea Systems 3001 HD-Series Heavy Duty On-Off Battery Switch
  • Category: Battery Disconnects
  • Manufacturer: Blue Sea Systems
  • Includes AFD (Alternator Field Disconnect)
  • Ignition protected - safe for installation aboard gasoline powered boats
  • Case design allows surface or rear panel mounting
  • Accepts two 4/0 AWG (95mm²) battery cables
  • 32V D Maximum Voltage
  • 1 Battery Input
  • 2 Switch Positions
  • Continuous rating of 600A. Intermittent rating of 900A (5 minutes)
  • 4/0 AWG (120mm²) Cable size to meet ratings
  • Terminal stud size 1/2" (M12)
  • Terminal stud torque 220 in-lb (24.86 Nm)
  • 1/4" (M6) Screw for mounting
Item#:
78411
Manufacturer Item:
3001
Manufacturer:
Blue Sea Systems
Min. Order Qty:
1
Avail #:
8
 
New Item
1+
152.4080
EACH
Alternator Field Disconnect (AFD) is a feature of some battery switches. AFD protects the diodes in the alternator if the battery switch is switched to the OFF position while the engine is running.

Not packaged for retail use. For retail product, see item 78411
  • Blue Sea Systems 3001B HD-Series Heavy Duty On-Off Battery Switch - Bulk Packaging 
  • Category: Battery Disconnects
  • Manufacturer: Blue Sea Systems
  • Includes AFD (Alternator Field Disconnect)
  • Ignition protected - safe for installation aboard gasoline powered boats
  • Case design allows surface or rear panel mounting
  • Accepts two 4/0 AWG (95mm²) battery cables
  • 32V D Maximum Voltage
  • 1 Battery Input
  • 2 Switch Positions
  • Continuous rating of 600A. Intermittent rating of 900A (5 minutes)
  • 4/0 AWG (120mm²) Cable size to meet ratings
  • Terminal stud size 1/2" (M12)
  • Terminal stud torque 220 in-lb (24.86 Nm)
  • 1/4" (M6) Screw for mounting
Item#:
78411B
Manufacturer Item:
3001B
Manufacturer:
Blue Sea Systems
Min. Order Qty:
1
Avail #:
22
You must be logged in to order this item. Log in here
 
Trombetta's Battery Separator solution features a modern, integrated package that eliminates dated side saddle mounting of electronics on a standard solenoid with exposed bus bars and wires. Available with Start Assist to provide a cost effective and power saving device ideal for all truck, RV, and emergency vehicle applications.
  • Trombetta SBS-200-002 Magnetic Latching Battery Separator
  • Category: Battery Separators
  • Manufacturer: Trombetta
  • Voltage Monitoring Studs: (2) M8 Studs
  • Termination: Deustch DT04-3P Connector
  • SAE J1455
  • Maximum Start Assist Battery Voltage Difference: 0.85 Volts
  • Minimum Start Assist Signal Voltage: 1.5 Volts
  • While the Start Assist Signal Voltage (VSS) is applied to the Start Assist Input -and- the difference between the battery voltages are within the Start Override Battery Difference (VSBD), the contactor will be Closed to assist with vehicle starting
Item#:
80620
Manufacturer Item:
SBS-200-002
Manufacturer:
Trombetta
Min. Order Qty:
1
Avail #:
32
1+
118.9970
5+
114.1880
10+
109.5680
25+
101.3930
EACH
Trombetta's Battery Separator solution features a modern, integrated package that eliminates dated side saddle mounting of electronics on a standard solenoid with exposed bus bars and wires. Available with Start Assist to provide a cost effective and power saving device ideal for all truck, RV, and emergency vehicle applications.
  • Trombetta SBS-200-003 Magnetic Latching Battery Separator
  • Category: Battery Separators
  • Manufacturer: Trombetta
  • Voltage Monitoring Studs: (2) M8 Studs
  • Termination: 16 gauge wire lead with ring terminal for 3/8" stud size
  • SAE J1455
  • Maximum Start Assist Battery Voltage Difference: 0.85 Volts
  • Minimum Start Assist Signal Voltage: 1.5 Volts
  • While the Start Assist Signal Voltage (VSS) is applied to the Start Assist Input -and- the difference between the battery voltages are within the Start Override Battery Difference (VSBD), the contactor will be Closed to assist with vehicle starting
LED Conditions:
  • LED Off: During the state correction lockout period or the stud voltages are not within the functional voltage range
  • LED Blinking: The contactor is open and operating within normal operating conditions
  • LED On: The contactor is closed 
Item#:
80621
Manufacturer Item:
SBS-200-003
Manufacturer:
Trombetta
Min. Order Qty:
1
Avail #:
32
1+
112.3920
5+
107.8460
10+
103.4780
25+
95.7590
EACH
Trombetta's Battery Separator solution features a modern, integrated package that eliminates dated side saddle mounting of electronics on a standard solenoid with exposed bus bars and wires. Available with Start Assist to provide a cost effective and power saving device ideal for all truck, RV, and emergency vehicle applications.
  • Trombetta SBS-200-001 Magnetic Latching Battery Separator
  • Category: Battery Separators
  • Manufacturer: Trombetta
  • Voltage Monitoring Studs: (2) M8 Studs
  • Termination: (3) 18 gauge wire leads with 1/4" Male Disconnects
  • SAE J1455
  • Maximum Start Assist Battery Voltage Difference: 0.85 Volts
  • Minimum Start Assist Signal Voltage: 1.5 Volts
  • While the Start Assist Signal Voltage (VSS) is applied to the Start Assist Input -and- the difference between the battery voltages are within the Start Override Battery Difference (VSBD), the contactor will be Closed to assist with vehicle starting
Item#:
80622
Manufacturer Item:
SBS-200-001
Manufacturer:
Trombetta
Min. Order Qty:
1
Avail #:
0
1+
112.3920
5+
107.8460
10+
103.4780
25+
95.7590
EACH
1 - 9 of 9
View: