loading content

When to Use an Equalizer in Dual Voltage Systems

Posted on Nov 16, 2026 by Robert Iversrud

Up until the 1950s, most vehicles had a 6V electrical system. Even in the days before light bars and cell phone chargers, growing electrical demands were putting more strain on 6V systems. To meet the demand for more power, the auto industry moved to 12V systems.

That was roughly 70 years ago. It’s no surprise that 12V is no longer sufficient for many modern applications. Moving to 24V can help meet those demands, but not every component can run on the higher voltage. And for many applications, 12V components remain more readily available.

Dual voltage systems offer a practical way to use both 12V and 24V components, with two 12V batteries providing the power. There’s a catch, though: simply wiring the batteries in series and drawing 12V power from the junction between them can create an imbalance that dramatically reduces battery life.

That’s where a battery equalizer comes in. By keeping the battery voltages balanced, it helps both batteries share the work. Here’s what you need to know.

What is a Battery Equalizer?

A battery equalizer is a specialized DC-DC converter designed to convert electrical power from one voltage to another at high efficiency. It’s used to keep battery voltages balanced in dual voltage systems.

How Does a Battery Equalizer Work?

The main purpose of the equalizer is to keep your system’s batteries balanced. In the 12/24V system described here, with a 24V alternator, the equalizer output voltage is half of the total voltage across the two batteries. By maintaining this ratio, the equalizer keeps the voltage across each battery approximately equal. Use matched batteries of the same type and capacity and follow the manufacturer’s installation instructions.

Why Do I Need a Battery Equalizer System?

Here’s what an equalizer system looks like with two 12V batteries under a 12V load, with the engine off.

The load starts by drawing power from the “A” battery. As its voltage begins to drop, the equalizer increases its output to maintain the voltage balance, drawing power from the full 24V battery bank. This way, the load power is furnished by both batteries, rather than depleting just the “A” battery.

With the Engine On

When the engine is on, the 24V alternator supplies charging voltage to the battery bank and the equalizer. At a total charging voltage of 28V, for example, the equalizer maintains approximately 14V across each battery (the typical optimum charge voltage for 12V batteries). The correct charging voltage depends on the battery type and temperature; follow the battery manufacturer’s recommendations.

Imagine if these two batteries were wired in series with an alternator, but without the equalizer. With a 12V load and the engine off, the “A” battery would discharge while the “B” battery remained charged. With the engine on, the alternator would charge the series-connected pair, but the 12V load would continue to draw only from the “A” battery. This imbalance could leave the “A” battery undercharged while the “B” battery overcharges, overheats and loses lifespan.

When Is an Equalizer System NOT the Best Option?

For 12V/24V applications that draw 12V power from the junction between two series-connected batteries, an equalizer system can help maximize battery life. However, for simple systems with low power demands, a fixed output converter may be more economical. Such applications include:

  • 12V fuse boxes on a 24V bus
  • CB or entertainment radios on 24V farm or construction equipment
  • Engine or transmission controller power supplies on 24V vehicles 

In these cases, a suitably rated fixed output converter can supply the 12V loads directly from the full 24V supply, without tapping the junction between the batteries.

Choosing the Right Equalizer Size

The right size (output current) of your equalizer depends on your 12V load requirements. As a starting point, allow at least 120% of the average 12V load, then confirm the selection against the manufacturer’s sizing guidance, including peak loads and duty cycle. For example, a fan motor with a continuous current draw of 10 amps would call for at least 10A × 120% = 12A under this guideline.

If your equalizer will be operated in a high-temperature setting, it may need to be derated — that is, operated below its normal rated output. Check the manufacturer’s temperature ratings; you may need a higher-capacity equalizer.

Optimize Your Dual Voltage System

Dual voltage systems make it easier to choose electrical components—whether 12V or 24V—that are the best fit for each application in your vehicle. 

A properly sized battery equalizer helps prevent uneven discharge and charging of the two 12V batteries. It does not increase the batteries’ stored energy or prevent both batteries from running down if loads exceed the available power. But when chosen and used properly, an equalizer helps ensure adequate power without draining, overworking, or overcharging either battery. 

Click through to see Waytek’s selection of Eaton Sure Power Equalizers.



    Subscribe Now

    Subscribe and be the first to know when new articles are published.

    style
    content