Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_P86CH0O0I0RF10IB06HRVQ0087
S2K Commerce - Products Dropdown
Z7_11LI04820H5B40QDV9TVRM1002
S2K Commerce - Shopping Cart
Z7_EL9QHKG10GPM20IJGE61AK10S5
S2K Commerce - Order Entry
Home  > InPower(x)

InPower Relays & Switches

InPower Electronics specializes in advanced electronic solutions for a wide range of commercial vehicle applications requiring vehicular power, monitoring or control. InPower products feature simple components with no moving parts to enhance reliability and performance. Their universal products for work trucks are highly respected within the automotive industry.

Waytek is a proud InPower distributor that offers a selection of timer relays, disconnect switches, and more.
1 - 12 of 42
View:
 
Description
Price
Quantity
  • InPower SSC20-100 Solid State DC Contactors
  • Category: Contactors
  • Manufacturer: InPower
  • SSC20 Series
  • Switch Type: Solid State
  • Circuitry: SPST
  • Amp Rating: 100A
  • 7.5 - 20VDC
  • Terminals: (2) 3/8-16 stainless steel studs
  • Dimensions: 2.85 x 4.35 x 1.10
  • Remotely operate high current circuits
  • Electronic, solid state design means no moving parts to wear-out
  • Rated 75A for mounting on wood, plastic, or free air
  • Automatic over-current, under-voltage, and over-temperature shutdown protection
  • Low resistance; Voltage spike protection for inductive loads; Max Current Rating Temperature 185F (85 C)
  • Status LED indicator light:
    • Steady on when electrical contactor is on and operating normally
    • Flashes when contactor has automatically turned off or detected loss of ground, over-current, under-voltage, or over-temperature
Item#:
44401
Manufacturer Item:
SSC20-100
Manufacturer:
InPower
Min. Order Qty:
1
Avail #:
0
 
Made in USA
Price Break for UM: EA

Qty Piece Price Ext. Price
1
132.3000
132.30
5
126.9400
634.70
10
121.8100
1218.10
25
114.9100
2872.75
  • InPower SSC20-100 Solid State DC Contactors
  • Category: Contactors
  • Manufacturer: InPower
  • SSC20 Series
  • Switch Type: Solid State
  • Circuitry: SPST
  • Amp Rating: 150A
  • 7.5 - 20VDC
  • Terminals: (2) 3/8-16 stainless steel studs
  • Low resistance; Voltage spike protection for inductive loads; Max Current Rating Temperature 185F (85 C)
  • Max Current Type B Mounting: 100A
  • Dimensions: 2.85 x 4.35 x 1.10
  • Remotely operate high current circuits
  • Electronic, solid state design means no moving parts to wear-out
  • Rated 75A for mounting on wood, plastic, or free air
  • Automatic over-current, under-voltage, and over-temperature shutdown protection
  • Status LED indicator light:
    • Steady on when electrical contactor is on and operating normally
    • Flashes when contactor has automatically turned off or detected loss of ground, over-current, under-voltage, or over-temperature
Item#:
44402
Manufacturer Item:
SSC20-150
Manufacturer:
InPower
Min. Order Qty:
1
Avail #:
15
 
Made in USA
Price Break for UM: EA

Qty Piece Price Ext. Price
1
148.8400
148.84
5
142.8100
714.05
10
137.0300
1370.30
25
129.2800
3232.00
  • InPower SSC42-275 Solid State Disconnect Switch
  • Category: Contactors
  • Manufacturer: Inpower
  • 100% solid state design
  • 3/8" stud and 1/4" tabs
  • 12VDC
  • 275 Amp over current shutdown
  • User-adjustable power shut-off timer
  • Multiple internal operating modes
  • Completely sealed construction
  • 800 Amp surge capability
  • Rubber protective battery terminal boots option
  • Low profile design
  • Over temperature shutdown
Item#:
44404
Manufacturer Item:
SSC42-275
Manufacturer:
InPower
Min. Order Qty:
1
Avail #:
9
 
Made in USA
Price Break for UM: EA

Qty Piece Price Ext. Price
1
238.3700
238.37
5
227.0200
1135.10
10
216.2100
2162.10
The SSC3 Series is InPower's third generation family of high current solid-state DC contactors. Low on resistance solid-state switches and high current fly back diodes provide not only outstanding surge current capability for starting high in-rush current loads but also maximum voltage spike suppression for high inductive loads.

  • InPower SSC3-200 Solid State DC Contactor
  • Category: Contactors
  • Manufacturer: Inpower
  • Switch Type: Solid State
  • Circuitry: SPST
  • Amp Rating: 200A
  • Max Volts: 20V
  • Ground and Input Terminals: 8/32 Terminals with Brass Nuts 
  • Remotely operates in high current circuits
  • Electronic, solid state design means no moving parts to wear-out
  • Rated 75A for mounting on wood, plastic, or free air
  • Automatic over-current, under-voltage, and over-temperature shutdown protection
  • Status LED indicator light: Steady on when electrical contactor is on and operating normally
  • Flashes when contactor has automatically turned off or detected loss of ground or over-current
  • Applications include: high current DC loads such as master battery disconnect switching, blower motors, auxiliary air conditioner units, lights, and hydraulic motors
Item#:
44418
Manufacturer Item:
SSC3-200
Manufacturer:
InPower
Min. Order Qty:
1
Avail #:
3
 
Made in USA
Price Break for UM: EA

Qty Piece Price Ext. Price
1
173.3700
173.37
5
166.3600
831.80
10
159.6200
1596.20
25
150.5900
3764.75
InPower's ABS3 Series of Auxiliary Battery Switches are the ideal solution for charging and isolating an auxiliary battery from a vehicle's chassis battery and alternator. The auxiliary battery is charged from the chassis battery and alternator while the chassis battery is protected from auxiliary battery load discharge. Since the ABS3 is bidirectional, a charging device (such as a battery charger or genset) that is connected to the auxiliary battery will also supply charging current to the chassis battery.

  • InPower ABS3-200A Auxiliary Battery Switch
  • Category: Battery Separators
  • Manufacturer: Inpower
  • Switch Type: Solid State
  • Current Rating: 200A
  • Operating Voltage Range: 7-18VDC
  • Terminals: 3/8-16 Brass Bolts with Copper Washers 
  • Ingress Protection: IP67
  • LED Indicator for visual switch status 
  • Electronic, solid state design means no moving parts that will wear-out
  • Ideal for charging auxiliary battery and isolating it from vehicle chassis battery and alternator
  • Prevents over-current, over-temperature and under voltage
Item#:
44419
Manufacturer Item:
ABS3-200A
Manufacturer:
InPower
Min. Order Qty:
1
Avail #:
0
 
Made in USA
Price Break for UM: EA

Qty Piece Price Ext. Price
1
246.9900
246.99
5
235.2200
1176.10
10
224.0300
2240.30
InPower's ABS3 Series of Auxiliary Battery Switches are the ideal solution for charging and isolating an auxiliary battery from a vehicle's chassis battery and alternator. The auxiliary battery is charged from the chassis battery and alternator while the chassis battery is protected from auxiliary battery load discharge. Since the ABS3 is bidirectional, a charging device (such as a battery charger or genset) that is connected to the auxiliary battery will also supply charging current to the chassis battery.

  • InPower ABS3-200B Auxiliary Battery Switch
  • Category: Battery Separators
  • Manufacturer: Inpower
  • Switch Type: Solid State
  • Current Rating: 200A
  • Operating Voltage Range: 7-18VDC
  • Terminals: 3/8-16 Brass Bolts with Copper Washers 
  • Ingress Protection: IP67
  • LED Indicator for visual switch status 
  • Electronic, solid state design means no moving parts that will wear-out
  • Ideal for charging auxiliary battery and isolating it from vehicle chassis battery and alternator
  • Prevents over-current, over-temperature and under voltage
  • Quad lug model allows the ABS3 to serve as a high current junction block 
  • Allows parallel power cabling between the auxiliary and chassis batteries
Item#:
44420
Manufacturer Item:
ABS3-200B
Manufacturer:
InPower
Min. Order Qty:
1
Avail #:
36
 
Made in USA
Price Break for UM: EA

Qty Piece Price Ext. Price
1
255.5000
255.50
5
243.3400
1216.70
10
231.7500
2317.50
InPower's ABS3 Series of Auxiliary Battery Switches are the ideal solution for charging and isolating an auxiliary battery from a vehicle's chassis battery and alternator. The auxiliary battery is charged from the chassis battery and alternator while the chassis battery is protected from auxiliary battery load discharge. Since the ABS3 is bidirectional, a charging device (such as a battery charger or genset) that is connected to the auxiliary battery will also supply charging current to the chassis battery.

  • InPower ABS3-300 Auxiliary Battery Switch
  • Category: Battery Separators
  • Manufacturer: Inpower
  • Switch Type: Solid State
  • Current Rating: 300A
  • Operating Voltage Range: 7-18VDC
  • Terminals: 3/8-16 Brass Bolts with Copper Washers 
  • Ingress Protection: IP67
  • LED Indicator for visual switch status 
  • Electronic, solid state design means no moving parts to wear-out
  • Ideal for charging auxiliary battery and isolating it from vehicle chassis battery and alternator
  • Prevents over-current, over-temperature and under voltage
  • Quad lug model allows the ABS3 to serve as a high current junction block 
  • Allows parallel power cabling between the auxiliary and chassis batteries
Item#:
44421
Manufacturer Item:
ABS3-300
Manufacturer:
InPower
Min. Order Qty:
1
Avail #:
2
 
Made in USA
Price Break for UM: EA

Qty Piece Price Ext. Price
1
315.1300
315.13
5
300.1100
1500.55
10
285.8300
2858.30
InPower's Model LVD20 Series Low Voltage Disconnects (LVD) automatically disconnects 12 volt loads from the battery when the battery voltage drops below a critical level, leaving enough charge for the vehicle to be restarted. When positive voltage is applied to the control terminal, the disconnect switch turns on, applying battery voltage to its load output. When the disconnect switch is on, its controller monitors the battery voltage at its battery terminal.

  • InPower LVD20-100-SPC442 Low Voltage Disconnect Switch
  • Category: Low Voltage Disconnects
  • Manufacturer: Inpower
  • Current Rating: 100A
  • Shut-Off Voltage: <11.5 VDC
  • Shut-Off Time Period: 60 Seconds 
  • Control Input Voltage: >9.5 volts to activate; < 8.5 volts to deactivate 
  • Terminal Size: 3/8-16 Threaded Stainless Steel Studs 
  • Status LED Indicator for visual status of operation 
  • Prevents excessive battery discharge by automatically disconnecting loads
  • Automatic shutdown protection for short circuit, over current, loss of ground and high temperature 
  • Sealed construction is resistant to mechanical shock and vibration
  • Microprocessor controller and solid state output with over-current shutdown
  • Continuously monitors voltage level of a 12VDC power input
  • 1/4" male tab contacts
  • Temperature Rating: -40°F (-40°C) to 185°F (85°C)
Item#:
44425
Manufacturer Item:
LVD20-100-SPC442
Manufacturer:
InPower
Min. Order Qty:
1
Avail #:
1
 
Made in USA
Price Break for UM: EA

Qty Piece Price Ext. Price
1
181.6200
181.62
5
174.2800
871.40
10
167.2200
1672.20
25
157.7500
3943.75
InPower's Model LVD20 Series Low Voltage Disconnects (LVD) automatically disconnects 12 volt loads from the battery when the battery voltage drops below a critical level, leaving enough charge for the vehicle to be restarted. When positive voltage is applied to the control terminal, the disconnect switch turns on, applying battery voltage to its load output. When the disconnect switch is on, its controller monitors the battery voltage at its battery terminal.

  • InPower LVD20-200-SPC444 Low Voltage Disconnect Switch
  • Category: Low Voltage Disconnects
  • Manufacturer: Inpower
  • Current Rating: 200A
  • Shut-Off Voltage: <11.5 VDC
  • Shut-Off Time Period: 60 Seconds 
  • Control Input Voltage: >9.5 volts to activate; < 8.5 volts to deactivate 
  • Terminal Size: 3/8-16 Threaded Stainless Steel Studs 
  • Status LED Indicator for visual status of operation 
  • Prevents excessive battery discharge by automatically disconnecting loads
  • Automatic shutdown protection for short circuit, over current, loss of ground and high temperature 
  • Sealed construction is resistant to mechanical shock and vibration
  • Microprocessor controller and solid state output with over-current shutdown
  • Continuously monitors voltage level of a 12VDC power input
  • 1/4" male tab contacts
  • Temperature Rating: -40°F (-40°C) to 185°F (85°C)
Item#:
44426
Manufacturer Item:
LVD20-200-SPC444
Manufacturer:
InPower
Min. Order Qty:
1
Avail #:
15
 
Made in USA
Price Break for UM: EA

Qty Piece Price Ext. Price
1
189.8800
189.88
5
182.2000
911.00
10
174.8200
1748.20
25
164.9200
4123.00
The SSC21 Series are part of InPower's second-generation family of high-current solid-state DC contactors. These single-channel power switches are rated at a continuous current rating of 100A, 150A, and 200A respectively. Low on-resistance solid-state switches and high current flyback diodes provide not only outstanding surge current capability for starting high inrush current loads but also maximum voltage spike suppression for loads.
  • InPower SSC21-100 Smart Contactor
  • Category: Contactors
  • Manufacturer: InPower
  • Switch Type: Solid State
  • Circuitry: SPST
  • Amp Rating: 100A
  • Terminals: (2) 3/8"-16 stainless steel studs, with locking nuts
  • Dimensions: 2.90" x 4.40" x 1.10"
  • Remotely operate high-current circuits
  • Low resistance; voltage spike protection for inductive loads; max. current rating temperature 185°F (85°C)
  • Electronic, solid-state design means no moving parts to wear out
  • Automatic over-current, undervoltage, and over-temperature shutdown protection
  • Features status LED indicator light
  • Steady on when electrical contactor is on and operating normally
  • Flashes when contactor has automatically turned off or detected loss of ground, over-current, undervoltage, or over-temperature
  • Applications include high-current DC loads such as master battery disconnect switching, blower motors, auxiliary air conditioner units, lights, and hydraulic motors
Item#:
44471
Manufacturer Item:
SSC21-100
Manufacturer:
InPower
Min. Order Qty:
1
Avail #:
16
 
Made in USA
Price Break for UM: EA

Qty Piece Price Ext. Price
1
132.0900
132.09
5
126.7400
633.70
10
121.6200
1216.20
25
114.7300
2868.25
The SSC21 Series are part of InPower's second-generation family of high current solid-state DC contactors. These single-channel power switches are rated at a continuous current rating of 100A, 150A, and 200A respectively. Low on-resistance solid-state switches and high-current flyback diodes provide not only outstanding surge current capability for starting high inrush current loads but also maximum voltage spike suppression for loads.
  • InPower SSC21-150 Smart Contact
  • Category: Contactors
  • Manufacturer: InPower
  • Switch Type: Solid State
  • Circuitry: SPST
  • Amp Rating: 150A
  • Operating Voltage Range: 7.5 to 20VDC
  • Terminals: (2) 3/8"-16 stainless steel studs, with locking nuts
  • Dimensions: 2.90" x 4.40" x 1.10"
  • Remotely operate high-current circuits
  • Low resistance; voltage spike protection for inductive loads; max. current rating temperature 185°F (85°C)
  • Electronic, solid-state design means no moving parts to wear out
  • Automatic over-current, undervoltage, and over-temperature shutdown protection
  • Features status LED indicator light
  • Steady on when electrical contactor is on and operating normally
  • Flashes when contactor has automatically turned off or detected loss of ground, over-current, undervoltage, or over-temperature
  • Applications include high-current DC loads such as master battery disconnect switching, blower motors, auxiliary air conditioner units, lights, and hydraulic motors
Item#:
44472
Manufacturer Item:
SSC21-150
Manufacturer:
InPower
Min. Order Qty:
1
Avail #:
17
 
Made in USA
Price Break for UM: EA

Qty Piece Price Ext. Price
1
148.6000
148.60
5
142.5800
712.90
10
136.8100
1368.10
25
129.0700
3226.75
The SSC21 Series are part of InPower's second-generation family of high current solid-state DC contactors. These single-channel power switches are rated at a continuous current rating of 100A, 150A, and 200A respectively. Low on-resistance solid-state switches and high-current flyback diodes provide not only outstanding surge current capability for starting high inrush current loads but also maximum voltage spike suppression for loads.
  • InPower SSC21-150 Smart Contactor
  • Category: Contactors
  • Manufacturer: InPower
  • Switch Type: Solid State
  • Circuitry: SPST
  • Amp Rating:  200A
  • Operating Voltage Range: 7.5 to 20VDC
  • Terminals: (2) 3/8"-16 stainless steel studs, with locking nuts
  • Dimensions: 2.90" x 4.40" x 1.10"
  • Remotely operate high-current circuits
  • Low resistance; voltage spike protection for inductive loads; max. current rating temperature 185°F (85°C)
  • Electronic, solid-state design means no moving parts to wear out
  • Automatic over-current, undervoltage, and over-temperature shutdown protection
  • Features status LED indicator light
  • Steady on when electrical contactor is on and operating normally
  • Flashes when contactor has automatically turned off or detected loss of ground, over-current, undervoltage, or over-temperature
  • Applications include high-current DC loads such as master battery disconnect switching, blower motors, auxiliary air conditioner units, lights, and hydraulic motors
Item#:
44473
Manufacturer Item:
SSC21-200
Manufacturer:
InPower
Min. Order Qty:
1
Avail #:
47
 
Made in USA
Price Break for UM: EA

Qty Piece Price Ext. Price
1
181.6200
181.62
5
174.2800
871.40
10
167.2200
1672.20
25
157.7500
3943.75
1 - 12 of 42
View:
Didn’t find the InPower 12v time delay relays that you were looking for? Feel free to call us at 800-328-2724, or write to sales@waytekwire.com. We’re happy to answer your questions.
Customer Service Hours
Monday-Friday 7:30AM-5:30PM CST
1.800.328.2724
Waytek, Inc.
2440 Galpin Court
Chanhassen, MN 55317 USA
Social Media