Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_P86CH0O0I0RF10IB06HRVQ0087
Z7_11LI04820H5B40QDV9TVRM1002
Z7_EL9QHKG10GPM20IJGE61AK10S5
Eaton's 154M2-105-1 mRFRM Populated J1939 Multiplex Module, 14 Relay, 28 Fuse, 200A, 12/24VDC
Item #: 39061
Manufacturer Item: 154M2-105-1
Manufacturer:
Eaton
Min. Order Qty: 1
Available: 0
482.6200
EACH
Quantity:

Quantity | Ea. Price | Ext. Price |
1 | 482.6200 | 482.62 |
5 | 459.6400 | 2298.20 |
10 | 437.7500 | 4377.50 |
The mRFRM is an effective solution for power distribution systems that require the ability to monitor and control relays and fuses; and a great replacement for complex, fully electronic (solid state) power distribution modules. The mRFRM is a power distribution module that distributes power to other devices in a vehicle while communicating over a CAN bus, and the mRFRM relies on a CAN controller module to control its relays and monitor component status messages.
- Eaton's 154M2-105-1 mRFRM Populated J1939 Multiplex Module
- Category: Power Distribution Modules
- Manufacturer: Molex
- Provides relay control over J1939 CAN
- Fuse and relay diagnostics over J1939 CAN
- Eliminate the need for individual connections between switches and loads
- Activated by battery voltage through ignition input
- Communicate with other devices on CAN bus using J1939 protocol
- Real Time monitoring of relay and fuse status
- Accepts plug-in components common to power distribution such as fuses, relays, circuit breakers, diodes
- Current: 100 Amps per each Stud, 30A max per terminal
- Modules come populated with Relays and Fuses
- Output Capacity:
- Input Stud Size: Two M8 studs
- Output Connectors: (Three) Apex 280 Series 10-Way Connectors: 38901, 38902 & 38903 & (One) Apex 150/280 Hybrid 14-Way Connector 38900

Power Distribution Modules
Termination
M8
Nominal Voltage
9-32VDC
Ingress Protection
IP66
# of Circuits
42 Circuit
Component Type
RFRM
Current Rating
200A
Temp (Degrees)
-40 to 85 Temp