Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_P86CH0O0I0RF10IB06HRVQ0087
Z7_11LI04820H5B40QDV9TVRM1002
Z7_EL9QHKG10GPM20IJGE61AK10S5

InPower LVD20-100-SPC442 Low Voltage Disconnect Switch, 100A, 12VDC
Item #: 44425
Manufacturer Item: LVD20-100-SPC442
Manufacturer:
InPower
Min. Order Qty: 1
Available: 0
117.4600
EACH
Quantity:

Quantity | Ea. Price | Ext. Price |
1 | 117.4600 | 117.46 |
5 | 112.7100 | 563.55 |
10 | 108.1500 | 1081.50 |
25 | 102.0300 | 2550.75 |
Made in USA
InPower's Model LVD20 Series Low Voltage Disconnects (LVD) automatically disconnects 12 volt loads from the battery when the battery voltage drops below a critical level, leaving enough charge for the vehicle to be restarted. When positive voltage is applied to the control terminal, the disconnect switch turns on, applying battery voltage to its load output. When the disconnect switch is on, its controller monitors the battery voltage at its battery terminal.
- InPower LVD20-100-SPC442 Low Voltage Disconnect Switch
- Category: Low Voltage Disconnects
- Manufacturer: Inpower
- Current Rating: 100A
- Shut-Off Voltage: <11.5 VDC
- Shut-Off Time Period: 60 Seconds
- Control Input Voltage: >9.5 volts to activate; < 8.5 volts to deactivate
- Terminal Size: 3/8-16 Threaded Stainless Steel Studs
- Status LED Indicator for visual status of operation
- Prevents excessive battery discharge by automatically disconnecting loads
- Automatic shutdown protection for short circuit, over current, loss of ground and high temperature
- Sealed construction is resistant to mechanical shock and vibration
- Microprocessor controller and solid state output with over-current shutdown
- Continuously monitors voltage level of a 12VDC power input
- 1/4" male tab contacts
- Temperature Rating: -40°F (-40°C) to 185°F (85°C)

Low Voltage Disconnects
Nominal Voltage
12VDC
Current Rating
100A