Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_P86CH0O0I0RF10IB06HRVQ0087
Z7_11LI04820H5B40QDV9TVRM1002
Z7_EL9QHKG10GPM20IJGE61AK10S5
Littelfuse FLEC3000Z-0 Configurable Power Distribution Module, Pre-populated, 300A
Item #: 45630
Manufacturer Item: FLEC3000Z-0
Manufacturer:
Littelfuse
Min. Order Qty: 1
Available: 1
388.8100
EACH
Quantity:
| Quantity | Ea. Price | Ext. Price |
| 1 | 388.8100 | 388.81 |
| 5 | 370.3000 | 1851.50 |
| 10 | 352.6600 | 3526.60 |
- Littelfuse FLEC3000Z-0 Configurable Power Distribution Module
- Category: Power Distribution Modules
- Manufacturer: Littelfuse
- Volt Rating: 12 or 24VDC
- Max Load: 300A
- Max Fuse Rating: 30A
- Fuse Capacity: 28 MINI style
- Relay Capacity: 18 ISO style
- Operating Temp: -40 to +85C
- Vibration Resistance: ISO 16750-3 Test II, 32 Hours
- Shock Resistance: ISO 16750-3, Section 4.2.2
- Output Connectors: Delphi GT Series
- FLEC maximizes available space and limits the number of additional units required
- The versatile nature of the FLEC unit means it can accept a large number of component types. MINI, ATO, MAXI, JCASE, MCASE, and ISO components are all accepted
- Rugged and sealed, the unit boasts an IP67 rating which allows it to be mounted in locations susceptible to moisture and dirt without any adverse effects
- Input stud caps prevent accidental short circuit while performing maintenance to and around the box
- Reduced risk of wiring faults: the FLEC uses highly reliable printed circuit board
- Note: FLEC can be custom designed. Contact Waytek sales for details
- FLEC parts included:
- (6) - 15A MINI Fuse
- (22) - 30A MINI Fuse
- (18) - ISO 280 Micro Relay with Resistor
- NO Amp: 35A
- NC Amp: 20A
- Volt Rating: 12V
- (2) - Spare 15A MINI Fuse
- (2) - Spare 30A MINI Fuse
- (1) - Fuse Puller
- Power Distribution Connectors Correspond with below parts:
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
Power Distribution Modules
Nominal Voltage
12-24V
Input Studs
M8 Input Stud
Ingress Protection
IP67
Current Rating
300A
