Z6_EL9QHKG10GPM20IJGE61AK10O0
Z7_P86CH0O0I0RF10IB06HRVQ0087
Z7_11LI04820H5B40QDV9TVRM1002
Z7_EL9QHKG10GPM20IJGE61AK10S5
Blue Sea Systems 7615 ATD Automatic Timer Disconnect
Item #: 78030
Manufacturer Item: 7615
Manufacturer:
Blue Sea Systems
Min. Order Qty: 1
Available: 66
150.6000
EACH
Quantity:

Quantity | Ea. Price | Ext. Price |
1 | 150.6000 | 150.60 |
RoHS Compliant
REACH Compliant
Packaged for retail use only. For bulk product, see item 78030B (must be logged in to purchase bulk)
- Blue Sea Systems 7615 ATD Automatic Timer Disconnect
- Category: Battery Chargers
- Manufacturer: Blue Sea Systems
- Can be configured to be used as one of the following battery saving products
- Sealed to IP67
- 12VDC signal triggers relay to connect battery power to devices
- When signal is removed the time is activated and will disconnect devices after a preset time
- Timer ranges from 15 minutes to 4 hours
- Senses low battery voltage and automatically disconnects devices
- Low voltage setting can be used in conjunction with Timer Disconnect. Low voltage will disconnect devices prior to preset time to preserve battery power
- Automatically combines two batteries when charging, and isolates them when discharging
- Single side sensing only monitors the voltage of the start battery
- Ideal for auxiliary batteries that are AGM or significantly larger than the start battery
- 12VDC signal will connect or disconnect relay without any time delay
- Nominal Voltage: 12VDC
- Amperage Operating Current: 175mA (closed) 4 mA (open)
- Terminal Stud Torque: 140 in-lb (15.82 Nm)
- Continuous Rating: The maximum current a switch is designed to conduct for an indefinite period - 120A
- Intermittent Rating: The maximum amount of current a switch is designed to carry for a minimum of a designated period of time - 210A (5 min)
- Cable Size to Meet Ratings: 1 Ga. (50mm)
- Charge Sense Connect: 13.0V (3 sec)
- Charge Sense Disconnect: 12.75V (10 sec)
- Disconnect Time: 5 sec, 15 min, 30 min, 1 hr, 1.5 hr, 2 hr, or 4 hr
- Input Voltage Range: 9.5-16VDC
- Low Voltage Disconnect
- 11.0V (10 sec)
- 11.5V (10 sec)
- 12.0V (10 sec)
- Maximum Cable Size: 1/0 Ga. (50mm)
- Terminal Ring Diameter Clearance: 1.12in (28.45mm)
- Terminal Stud Size: 3/8 -16 (M10)
- Over Voltage Lockout: 16.0V (5 sec)

Battery Chargers
Number of Batteries
3
Output Current
120 Amps
Input Voltage
12V DC
Output Voltage
12VDC Output
Component Type
Automatic Charging Relay